Sword Brands

Our Lancelot Sword is a product of the world famous Art Gladius factory in the historic sword manufacturing city of Toledo, Spain.

Its heavily decorated hilt features a textured cross-guard with heraldic dragons motif at the centre and quillons terminating in boar’s heads. The pommel is decorated with Fleur du Lys and heraldic lions and tops a wire-bound grip. The blunt stainless steel blade features etched heraldic decoration and is suitable for display only.

Total Length: 103cm
Blade Length: 83cm
Grip Length: 10.5cm
Weight: 972g
Blade Thickness (base): 0.2cm
Blade Width (base): 3.7cm
Point of Balance (PoB): 14.5cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

These latest additions to the Red Dragon Combat Range feature 3mm re-enactment safe edges and rounded tips. The blades are formed from tempered high-carbon steel (HRC Core of approx 48 and Edge 50-52) and fullered to ensure they are swift in the hand. Indeed a lot of time and effort has gone into make these blades as agile as possible whilst retaining a re-enactment safe edge.

The steel hilt fittings neatly sandwich the leather wrapped wooden grip and are held in place by a traditional peened tang. The leather wrapped wooden scabbard features a protective rain guard and metal chape. If you are part of a re-enactment group we recommend consulting your safety officer for guidance before purchase.

Total Length: 97.5cm
Blade Length: 75.5cm
Blade Width: 4.3cm
Grip Length: 16cm
Blade Thickness: 4.5mm
Guard Width: 18.5cm
Point of Balance: 11cm
Weight: 1.05kg
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt 3mm edge
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

Our Crusader Sword is a product of the world famous Art Gladius factory in the historic sword manufacturing city of Toledo, Spain. Toledo has a reputation for producing some of the finest swords in Europe and has been a centre of sword production for centuries.

The antique brass hilt features the cross pattée of the Templar Order on the pommel and belted grip. The Cross of St George is featured at the centre of the cross-guard.  The hilt has an antiqued brass finish and cord wrapped grip. The blunt stainless steel blade features heraldic decoration and is suitable for display only.  

Total Length: 103cm
Blade Length: 83.5cm
Grip Length: 10.5cm
Weight: 1150g
Blade Thickness (base): 0.2cm
Blade Width (base): 3.8cm
Point of Balance (PoB): 12cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our Squire's Excalibur sword is a product of the world famous Art Gladius factory in the historic sword manufacturing city of Toledo, Spain.

At only 75cm, this is the ideal "first sword" for any budding young knight and is also the perfect display piece when space is an issue. The ornate hilt features heraldic dragons on both the pommel and guard and tops an embossed stainless steel blade.

Total Length: 75cm
Blade Length: 58cm
Grip Length: 9cm
Weight: 1155g
Blade Thickness (base): 0.35cm
Blade Width (base): 3.37cm
Point of Balance (PoB): 2cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

The Knights Templar Sword is the most popular sword in our collection. If you do not have the space for a full-size sword why not consider purchasing the matching Knights Templar Dagger instead.

The sword features a forged steel blade with solid brass pommel and guard - both adorned with the Templar Cross in red enamel. Comes complete with leather scabbard with and baldric shoulder belt. This item has a blunt blade and is manufactured for display only.

Total Length: 92.5cm
Blade Length: 74.5cm
Grip Length: 12.5cm
Blade Thickness (base): 0.49cm
Blade Width (base): 4.5cm
Weight: 1046g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

The iconic Basket Hilt Sword was wielded by Jacobite warriors during the rebellions of 1715 and 1745. It was usually partnered with the Scottish targe shield and was used to devastating effect during the Highland Charge! After the rebellion had been suppressed, the wearing of Scottish Basket Hilt swords, synonymous with Highland dress, was outlawed. However, the sword was adopted by officers of the Highland regiments in the 19^th century.

Our Jacobite Basket Hilt Sword features a brass basket with red cloth lining. The hand forged high carbon steel blade has a blunt edge and is housed in a leather covered wood scabbard.

Total Length: 106cm
Blade Length: 89cm
Grip Length: 11cm
Weight: 1600g
Blade Thickness (base): 0.5cm
Blade Width (base): 3.6cm
Point of Balance (PoB): 20cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

Our William Wallace Braveheart Sword is inspired by the sword used in the film Braveheart.

It is forged from high carbon steel and features a broad blade topped with solid brass hilt fittings and a brown suede ricasso and grip. This sword features a blunt blade and is designed for display only. 

Total Length: 136cm
Blade Length: 97.5cm
Grip Length: 28.6cm
Weight: 2.1kg
Blade Width (base): 4.3cm
Point of Balance (PoB): 14cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our Red Dragon Stage Combat Sabre is the perfect starter weapon for stage combat and theatrical work. The durable bowl style hilt protects the hands from stray blows, whilst the flexible high carbon steel blade features a rolled tip for added safety.

The blade can be removed easily by unscrewing the pommel, great for transportation or maintenance.

Total Length: 103cm
Blade Length: 87cm
Grip Length: 13cm
Weight: 296g
Blade Thickness (base): 0.7cm
Blade Width (base): 1.1cm
Point of Balance (PoB): 10cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

The rapier began to develop at around the turn of the 15th century as the Spanish espada ropera, or "dress sword". It was a fast and light single handed sword designed for cutting and thrusting. In 1570 the Italian swordmaster Signior Rocco Bonetti settled in England and advocated the use of the rapier for thrusting as opposed to cutting when engaged in a duel. Although it was generally seen as a civilian weapon, more robust versions such as the Pappenheimer Rapier were developed for battlefield use and saw service in conflicts such as the English Civil War. Many rapier treatises still survive including "The Schoole of the Noble and Worthy Science of Defence" written in England in 1617 by Joseph Swetnam.

Our Renaissance Rapier features a hand forged complex hilt constructed from steel and polished to a bright finish. The wire-bound handle is both attractive and functional - allowing for a firmer grip than the leather bound equivalent. The hand forged steel blade is housed in a well made wooden scabbard with leather covering and steel fittings. This sword is blunt and designed for display only.

Total Length: 100.5cm
Blade Length: 88.5cm
Grip Length: 18.5cm
Weight: 1702g
Blade Thickness (base): 4.82cm
Blade Width (base): 0.5cm
Point of Balance (PoB): 17cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.